Technical Specifications

Limited Warranty - This product will perform as claimed if applied according to our directions. The directions apply to
most applications, but may not cover special conditions, applications, techniques and/or surfaces. If you have a question,
check with your dealer or contact Rust-Oleum Corporation, Vernon Hills, IL. Warranty is limited to replacement or
refunded value of product actually used if such product proves defective within two years of manufacture.
Typical Physical Properties
Percent Solids, Weight:
Percent Solids, Volume:
Viscosity Range:
Flame Spread (ASTM-84-
97A):
67%
42%
85-95 KU
Class 1
Dry Time @75° F / 50% RH:
Cure time
(For full scrape resistance)
Sheen Level @ 60
o
Touch: 35 min
Recoat: 1 hour
4 to 7 days
1 - 5
Smoke Contrib.
(ASTM-84-97A):
Flash Point (ASTM D3278):
VOC:
LEED:
MPI Certified:
Class 1
83
o
F (28
o
C)
Max 450 g/L
Meets 4.2 Requirements
#5, 45, 69, and 136
Freeze/Thaw Stable:
Shelf Life:
Storage/Handling:
Yes
60 mo @ 75°F (24°C)
Store indoors
40° - 80° F
(4° - 27°C)
Limitations – COVER STAIN is not intended for application to floors, decks, roof surfaces or any surface subject to immersion or
prolonged contact with water.