Technical Specifications

TECHNICAL DATA
ZNR-82
ZINSSER
®
SMARCOAT ADVANCED
PAINT & PRIMER IN ONE
2
Form: ARJ-1998
Rev.: 040920
PRODUCT APPLICATION (cont.)
COVERAGE/WHERE TO USE
Coverages varies depending on surface texture, porosity,
and application method. Dark colors may require multiple
coats. Ideal for interior walls, trim, windows, and doors.
Surfaces - Drywall, masonry and wood.
NOTE: Do not use on floors.
APPLICATION
Stir well before use. Intermix cans of the same color and
product to ensure color consistency. Apply using a high
quality 3/8”-1/2” nap roller or a high quality brush. If using an
airless sprayer, follow manufacturer's instructions for use,
and use a .013”-.017” tip at 1800-2300 psi, adjusting as
needed. Apply using even strokes, moving from dry to wet
areas, keeping a wet edge. Two coats are required for new
or uncoated surfaces. Some colors may require additional
coats. Thinning is not recommended.
DRY AND RECOAT TIMES
Based on 77°F (25°C) <50% humidity, dries to the touch in
one hour. May be recoated after four hours. Allow more time
to dry at cooler temperatures or in high humidity.
CLEAN-UP
Clean hands, tools, spills and splatters with soap and warm
water.
DISPOSAL
To dispose of empty containers and unused product, contact
your local environmental regulatory agency.
MAINTENANCE CARE
Do not place objects on painted surfaces until thoroughly
dry. Freshly painted surfaces may be washed after 30 days.
Clean with mild, non-oily soap and water.