Technical Specifications

Tinting – Tint with up to 2 fluid oz. universal colorant per gallon. Tinting toward the finish color helps paint hide in one coat.
Coverage – About 400 sq. ft. per gallon (10 sq. m/liter). Coverage may vary depending upon method of application and surface
porosity.
Dry Time – To touch in 40 minutes; sand or re-coat after 2 hours. Lower temperatures, higher humidity and the addition of tine will
prolong dry and cure time of the product.
Cleanup – Clean application tools immediately after use with paint thinner (mineral spirits). Follow equipment manufacturer’s
directions to clean spray equipment. Wipe up splatters before they dry.
Disposal – Dispose of unused or unwanted product in accordance with local laws regulating water base coatings.
Limitations
Bulls Eye Oil Base is not recommended for exterior application or for use on floors or surfaces subject to immersion or prolong contact
with water.
Caution
Warning!
Flammable liquid and vapor
Contains petroleum distillates
Do not get in eyes. Flush eyes with plenty of water for at least 15 minutes. Do not take internally. If swallowed call a
physician or Poison Control Center. Do not breath in vapors or spray mist. Ensure good corss ventilation during
application and drying. If you experience difficulty in breathing, eye watering, headache, or dizziness, increase fresh air;
wear an appropriate, properly fitted (NIOSH approved) respirator; or leave the area and obtain fresh air. Avoid contact
with skin and clothing. Wash thoroughly after handling. Warning: This product contains a chemican known to the state of
California to cause cancer and birth defects, or other reproductive harm. Keep container closed when not in use. KEEP
OUT OF REACH OF CHILDREN.