SDS

ManualsBrandsZinsser ManualsPaint1 gal. B-I-N Shellac-Based White Interior/Spot Exterior Primer and Sealer (2-Pack)

Date Printed: 3/9/2018

Safety Data Sheet

* Trusted Quality Since 1921 *

www.rustoleum.com

1. Identification

Product Name: BIN 1-GL 2 PK PRIMER Revision Date: 3/9/2018

Product Identifier: 320991 Supercedes Date: New SDS

Product Use/Class: Primer/Shellac

Supplier:

Rust-Oleum Corporation

11 Hawthorn Parkway

Vernon Hills, IL 60061

USA

Manufacturer:

Rust-Oleum Corporation

11 Hawthorn Parkway

Vernon Hills, IL 60061

USA

Preparer: Regulatory Department

24 Hour Hotline: 847-367-7700

Emergency Telephone:

2. Hazard Identification

Classification

Symbol(s) of Product

Signal Word

Danger

Possible Hazards

24% of the mixture consists of ingredient(s) of unknown acute toxicity.

GHS HAZARD STATEMENTS

Flammable Liquid, category 1 H224 Extremely flammable liquid and vapour.

GHS LABEL PRECAUTIONARY STATEMENTS

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P233 Keep container tightly closed.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/

shower.

P370+P378 In case of fire: Use alcohol film forming foam, carbon dioxide, dry chemical, dry sand to extinguish.

Page 1 / 7

Summary of content (7 pages)

PAGE 1
Date Printed: 3/9/2018 Page 1 / 7 Safety Data Sheet * Trusted Quality Since 1921 * www.rustoleum.com 1.
PAGE 2
Date Printed: 3/9/2018 Page 2 / 7 P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents/container in accordance with local, regional and national regulations. GHS SDS PRECAUTIONARY STATEMENTS P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting/equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. 3.
PAGE 3
Date Printed: 3/9/2018 Page 3 / 7 6. Accidental Release Measures STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools. Dispose of according to local, state (provincial) and federal regulations. Do not incinerate closed containers. Ventilate area, isolate spilled material, and remove with inert absorbent.
PAGE 4
Date Printed: 3/9/2018 Page 4 / 7 9. Physical and Chemical Properties Appearance: Odor: Relative Density: Freeze Point, °C: Solubility in Water: Decompostion Temp., °C: Boiling Range, °C: Flammability: Evaporation Rate: Vapor Density: Liquid Alcohol Like 1.177 N.D. Miscible N.D. -18 - 537 Supports Combustion Slower than Ether Heavier than Air Physical State: Odor Threshold: pH: Viscosity: Partition Coefficient, n-octanol/ water: Liquid N.E. N.A. N.D.
PAGE 5
Date Printed: 3/9/2018 Page 5 / 7 14. Transport Information Domestic (USDOT) International (IMDG) Air (IATA) TDG (Canada) N.A. 1263 1263 N.A. Paint Products in Limited Quantities Paint Paint Paint Products in Limited Quantities Hazard Class: N.A. 3 3 N.A. Packing Group: N.A. II II N.A. Limited Quantity: Yes Yes No Yes UN Number: Proper Shipping Name: 15. Regulatory Information U.S.
PAGE 6
Date Printed: 3/9/2018 Page 6 / 7 Rust-Oleum Corporation believes, to the best of its knowledge, information and belief, the information contained herein to be accurate and reliable as of the date of this safety data sheet. However, because the conditions of handling, use, and storage of these materials are beyond our control, we assume no responsibility or liability for personal injury or property damage incurred by the use of these materials.
PAGE 7
Date Printed: 3/9/2018 Page 7 / 7