Technical Specifications

TECHNICAL DATA

WRT-11

ZINSSER

WATERTITE

CLEAR

MOLD & MILDEW PROOF FLOOR & WALL PAINT

Form: GDH-1077

Rev.: 012821

PRODUCT APPLICATION (cont.)

APPLICATION (cont.)

The second coat can be brushed or rolled on.

WaterTite

Clear Mold & Mildew-Proof Floor & Wall Paint can be spray

applied with an airless or conventional sprayer, but always

back brush the first coat. For floor applications, the second

coat should be applied in a cross direction to the first coat to

achieve uniformity. Apply 2 coats. Not recommend for

surfaces subject to vehicular traffic. Any screws, nail heads

or anchors that penetrate the coating will nullify the

waterproofing properties.

DRY AND RECOAT

Dry and recoat times are based on 70°F and 50% relative

humidity. Lower temperatures and higher humidity will

increase dry time. Dries to the touch in 2 hours and 2-3

hours for recoat. Expect light foot traffic in 3 hours and heavy

foot traffic in 24 hours. Only recoat after the first coat is

completely dry. Protect from rain for 8 hours after

application.

COVERAGE

Covers up to 100 square feet per gallon depending on

porosity of surface and method of application.

CLEAN UP

Clean hands and tools with soapy water. Drips and runs

should be removed immediately. Once dry, drips and runs

can be removed by sanding or stripping.