Technical Specifications

TECHNICAL DATA

SUREGRIP

122 HEAVY DUTY CLEAR STRIPPABLE WALLCOVERING ADHESIVE

Form: GDH-131

Rev.: 121317

.PRODUCT APPLICATION (cont.) .

APPLICATION

Use only when temperature is between 50-100°F (10-

38°C) and the relative humidity is less than 85%. Adhesive

is ready to use but may be thinned with a maximum of 1

pint of water per gallon of adhesive for use with lightweight

non-pasted or pre-pasted wallpaper. Apply an even coat

using a roller, brush or pasting machine to the back of the

wallcovering. Make sure sufficient adhesive is on edges.

Avoid contact with the surface of embossed or delicate

wallcovering. Book and hang wallcovering according to the

manufacturer’s instructions.

COVERAGE

One gallon of adhesive will hang up to 4 to 5 double rolls

or 280 square feet. Spread rate may differ with various

backings.

.PRODUCT APPLICATION (cont.) .

CLEAN-UP

Remove excess adhesive on or around the wallcovering

immediately with clean water. Additional effort may be

required if adhesive is allowed to contact the surface of

embossed or textured vinyl. Close container tightly after

each use.

TOOL CLEAN-UP

Clean tools with warm water.

STORAGE

Protect from freezing. Always keep the container tightly

closed and store in a cool dry place at temperatures

between 40-100°F (4-38°C).