Technical Specifications

ManualsBrandsZinsser ManualsCeiling Paint1-gal. Ceiling Paint and Primer in One (Case of 2)

11 Hawthorn Parkway

Vernon Hills, IL 60061

Zinsser Ceiling Paint

Technical Data Bulletin

ZINSSER Ceiling Paint is a high performance, low VOC, latex acrylic paint specially designed for

ceilings. Formulated with superior stain-blocking technology, ZINSSER Ceiling Paint seals water and

other household stains in just one coat! Plus, in order to make it easy to see where you have

previously painted, ZINSSER Ceiling Paint goes on pink and dries to a bright white. The high hiding,

flat sheen also provides a mildew resistant finish.

Selection Data

Latex acrylic resin, water-base, flat sheen ceiling paint.

Performance Characteristics:

Formulated with Stain-Blocking Technology—seals water and other household stains

One coat coverage—makes painting the ceiling quick and stress-free

Applies pink, dries white—never miss a spot

Spatter-resistant formula dries quickly and evenly

Mold and mildew resistant finish

Low VOC, water-base, flat sheen

Soap and water clean up

Lifetime Guarantee* (See last page for details)

Recommended Use Areas and Surfaces – Apply to new or previously painted or primed wood, drywall, painted metal

and plaster, textured and popcorn style ceilings in kitchens, bathrooms, basements, closets and more. Bare metal, new or

knocked-down texture should be primed and sealed with Bulls Eye 123

Primer. If unsure about the integrity of the

surface and need to test the adhesion, place a 2‖ piece of scotch tape on the ceiling and pull off. If tape comes off with

remnants of the ceiling, you need to prime first. Seal new popcorn ceilings with

CoverStain

Primer before applying

any latex-base ceiling paint.

Coverage – One coat coverage--no priming is required. Coverage is 250 to 400 sq. ft. depending upon the surface

texture, porosity and application method.

Surface Preparation – Clean all surfaces with a damp cloth to remove any dirt, dust, grease, wax, wallcovering

adhesive, soap film, loose paint or other surface contaminants. Use

JOMAX

Mold

Mildew Stain Remover

to clean

and remove mold and mildew stains. After cleaning, allow ample time for surface to dry. Dull glossy surfaces by scuffing

or sanding. Patch all cracks and holes with a patching compound such as READY PATCH

or similar product. Countersink

nail heads and sand smooth. For severe stains, use

Bulls

Eye

1-2-3

Primer.

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD

DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN

SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a

HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the

National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

Recommended Tools – Apply with a quality ½‖ nap roller or a nylon or polyester brush. An extension pole is

recommended for making longer strokes. Can be spray applied.

Application Data

Use ZINSSER Ceiling Paint when surface and air temperatures are between 50-90

◦

F (10-32

◦

C). Stir thoroughly before

using. Apply at package consistency. Do not thin for one coat coverage. Apply generously and avoid overspreading.

Provide ample ventilation and warmth for normal drying. Product was designed to go on with a pink color, to easily

identify missed or skipped areas. As the paint dries, it will change to its intended

―

bright

white‖ ceiling color. The paint

typically dries in 1 hour or less. Thick films, poor ventilation, cool temperatures or high humidity may increase the time

Summary of content (3 pages)

PAGE 1
Technical Data Bulletin 11 Hawthorn Parkway Vernon Hills, IL 60061 Zinsser Ceiling Paint ZINSSER Ceiling Paint is a high performance, low VOC, latex acrylic paint specially designed for ceilings. Formulated with superior stain-blocking technology, ZINSSER Ceiling Paint seals water and other household stains in just one coat! Plus, in order to make it easy to see where you have previously painted, ZINSSER Ceiling Paint goes on pink and dries to a bright white.
PAGE 2
for this color change to take affect. Hot and dry conditions or a porous surface may cause the color change to occur more quickly. 1. Stir paint thoroughly with a lifting motion to insure uniform color. 2. Prepare roller or brush by dampening it with water. 3. Brush a 3‖ or 4‖ border around the edge of the ceiling. 4. Start with the short dimension of the ceiling. Paint across one end of the room first, doing a strip wide enough to suit your reach.
PAGE 3
Typical Physical Properties Solids by Weight: Solids by Volume: Weight (lb/gallon): Required Number of Coats: 61.42% 40.53% 12.5 lbs. 1, 2 coats for severe stains 250 to 400 sq. ft. per Spread Rate: gal DFT – 250 to 400 sq ft Coverage @ 3 mils: Smooth surface: Brush or Roller Application: Airless Sprayer: VOC: Max VOC 50 g/L Flashpoint (Setaflash): Perm Rating: Dry to touch @ 70 ◦F (21◦C): Dry to recoat @ 70◦F (21◦C): Cure Time: >200◦F (93.