Specification
TECHNICAL DATA PPL-03
ROLL-A-TEX
ACOUSTIC CEILING TEXTURE ADDITIVE
Rust-Oleum Corporation Form: GDH-226
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 120415
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.DESCRIPTION AND USES .
Roll-A-Tex Acoustic Ceiling Texture Additive is designed
to create the look of an acoustical ceiling when added to
paint. Simply mix this additive into any paint to
permanently fill cracks and instantly hide flaws to create
an attractive texture.
PERFORMANCE CHARACTERISTICS .
Permanently fills and covers cracks and flaws
Eliminates the need for tedious and time consuming
crack repairs
Provides an attractive acoustic texture to new and old
ceilings
Easy to apply, no special techniques required
Suitable for do-it-yourselfers
Just mix with paint and apply
PRODUCTS .
SKU Description
22235 1-Pound
PRODUCT APPLICATION .
INSTRUCTIONS FOR USE
Use only when air, material, and surface temperatures are
between 50-90ºF (10-32ºC) and the relative humidity is
below 85%. While mixing, wear a NIOSH approved dust
mask. In a separate container, add the contents of the
package to one gallon of any paint. Add less for surfaces
in good condition and more for surfaces that require more
hiding and texturing. Thoroughly mix to ensure that the
contents are incorporated. Use a ⅜” to ¾” nap roller cover
to apply the paint product following the paint
manufacturer’s directions.
CLEAN-UP
Follow paint manufacturer’s directions for clean up and
disposal.
.PHYSICAL PROPERTIES .
Physical Properties
ROLL-A-TEX ACOUSTIC CEILING TEXTURE ADDITIVE
Composition
Calcium Carbonate, Crystalline Silica
Weight
Per Gallon
22.6 lbs.
Solids
By Weight
100%
By Volume
100%
Volatile Organic Compounds
0 g/l
Practical Coverage
Will depend on the method of application and surface type
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.