Technical Specifications

TECHNICAL DATA
BEY123-01
BULLS-EYE 1-2-3
WATER-BASED PRIMER
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877∙385∙8155
www.rustoleum.com
Form: GDH-556
Rev.: 041219
PHYSICAL PROPERTIES
Resin Type
Styrenated Acrylic
Pigment Type
Titanium Dioxide
Solvents
Glycol Ethers, Water
Weight
Per Gallon
10.5 lbs.
Per Liter
1.26 kg
Solids
By Weight
50.5%
By Volume
34.0%
Volatile Organic Compounds
<100 g/l (0.83 lbs./gal.)
Recommended Dry Film
Thickness (DFT) per Coat
1.0-2.0 mils (25-50µ)
Wet Film to Achieve DFT (Unthinned material)
3.0-6.0 mils (75-150µ)
Theoretical Coverage at 1 mil DFT (25µ)
545 sq.ft./gal. (13.4 m
2
/l)
Practical Coverage at Recommended DFT
(assume 15% material loss)
450 sq.ft./gal. (11.1 m
2
/l) non-porous
350 sq.ft./gal. (8.6 m
2
/l) porous
Dry Times at 70-80°F
(21-27ºC) and 50%
Relative Humidity
Touch
35 minutes
Top Coat
1 hour
Stain Sealing
2 hours, 24 hours over cedar
Full Hardness
7 days
Shelf Life
5 years
Flame Spread (ASTM-84-97A)
Class 1
Smoke Contribution (ASTM-84-97A)
Class 1
Flash Point
>180ºF (82ºC)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.