Technical Specifications

TECHNICAL DATA
BEY123-01
BULLS-EYE 1-2-3
WATER-BASED PRIMER
2
Form: GDH-556
Rev.: 041219
PRODUCT APPLICATION (cont.)
APPLICATION
Shake or stir well and apply using brush, roller or sprayer
(follow spray equipment manufacturer’s instructions; for
airless spraying use .017 tip at 2000 - 2500 P.S.I.). If
thinning is required add no more than 10 oz. (295 ml) clean
water per gallon and apply a second coat of primer. Apply
between 35°F and 90°F (2°C and 32°C), RH < 85%.
TINTING
To improve the hiding power of the topcoat, tint Bulls Eye 1-
2-3 toward the topcoat color with up to 2 oz. (59 ml) of
universal colorant per gallon.
DRY TIME
Dries to the touch in about 30 minutes; can be topcoated in 1
hour. Full adhesion and hardness develops in 7 days.
PRODUCT APPLICATION (cont.)
COVERAGE
Approximately 400–450 sq. ft. (37–42m
2
) per gallon. May
vary with application method and surface porosity.
CLEAN UP
Clean up spills and paint drips with warm water and liquid
detergent. Wipe up splatters before they dry. Follow
manufacturer’s directions to clean spray equipment.
Dispose of unused or unwanted product in accordance with
local laws regulating solvent-based coatings.
LIMITATIONS
Not recommended for application to floors or decks or to
surfaces subject to immersion or prolonged contact with
water.