MSDS

N/A: Not Applicable N/D: Not Determined N/E: Not Established N/R: Not Required Est.: Estimated
1-2-3 MSDS (4-8-9) Page 3 of 6 pages.
Handling: Avoid contact with eyes, skin, and clothing.
Storage: Keep from freezing. Keep container closed when not in use.
Section 8 Exposure Controls / Personal Protection
Engineering Controls: If exposure conditions warrant, use local exhaust ventilation or
general dilution ventilation to reduce vapor concentrations.
Personal Protective Equipment (PPE):
Eye Protection: Wear safety glasses, goggles, or face shield to prevent eye contact.
Skin Protection: Wear gloves to prevent prolonged skin contact.
Respiratory Protection: None required under normal intended use conditions. In areas of poor
ventilation or if vapor exposure causes discomfort, wear NIOSH approved respirator with
organic vapor cartridges.
Protective Clothing: For brief contact, no special precautions other than clean body-covering
clothing should be needed. When prolonged or frequent, repeated contact with the material could
occur, use protective clothing that is impervious to this material (such as tyvek).
General Hygiene Practices: Wash after handling. Prevent Eye contact. Avoid prolonged skin
and inhalation contact. Wash thoroughly before handling food.
Section 9 Physical Data
Appearance: White emulsion. Odor: Acrylic like odor.
Physical State: Liquid pH: 9.0 – 10.0
Boiling Point: Approximately 212° F Melting Point: Approximately 32° F
Vapor Pressure: N/D Vapor Density: N/D
Viscosity: 3000 – 8000 cps (at 74° F) Solubility in Water: Dilutable in water.
Specific Gravity (water = 1): 1.26 (10.5 lb/gal) VOC Content: ≤ 100 g/l
Section 10 Stability and Reactivity
Stability: This material is stable, not reactive.