Technical Specifications

Drying Time - Dries to the touch in 30 to 45 minutes; can be
recoated after 1 hour. Lower temperature and higher humidity
will prolong dry time of the product.
Topcoating – FastPrime2 is compatible with latex and alkyd
paints. If unsure of topcoat compatibility test apply primer and
topcoat on a piece of scrap material.
Cleanup – Clean up spills and drips with a wet rag. If spills or
drips have dried use latex paint remover. Clean application
tools in detergent and warm water immediately after use. If
product has dried on application tool soak the tool overnight in
brush cleaner. Scrub bristles clean with a wire brush. Follow
manufacturer’s instructions when cleaning spray equipment.
Limitations
FastPrime2 is not intended for priming under or over
wallcoverings. for application to ferrous metals, floors, decks,
roof surfaces or for application to any surface subject to
immersion or prolonged contact with water.
Precautions
CAUTION! – Avoid contact with eyes. In case of eye contact,
flush eyes with plenty of water for at least 15 minutes. Do not
Warranty – FastPrime2 is guaranteed to perform as
indicated when applied according to label directions to a
properly prepared surface. Directions are as complete as
possible but cannot encompass all conditions, applications,
and/or surfaces beyond manufacturer’s control. The contents
of the container are warranted to be free from any other defect
for 2 years from the date of manufacture. All warrantees and
guarantees are limited to refund or replacement of product
used with proof of purchase. No other warranty or guarantee is
expressed or implied.
Typical Physical Properties
Solids by weight 56% Solids by
volume 37%
Gloss/Sheen Flat (60-3, 85-5)
Density 1.38
Weight/Gallon 11.49 lbs./gal.
Viscosity range 92 - 97 KU
VOC 150 grams/liter
Flashpoint (Seta flash) None
o
take internally. If swallowed call a physician or Poison Control
Dry time @ 70 F & 50% RH 1 hour
Center. Use adequate ventilation. Keep Out of Reach of
Children. If spraying wear a NIOSH approved respirator. KEEP
OUT OF REACH OF CHILDREN. KEEP FROM FREEZING.
Shelf Life 60 months @ 75
o
F.
Storage/Handling Store indoors
40
o
F to 90
o
F (4
o
to 32
o
C)