User's Manual

IMPERISYS - HOME CONTROLLER (CHC)
Installation and Quick Start Guide
131 Ilsley Avenue, Unit C
Dartmouth, Nova Scotia
B3B 1T1
[phone]
www.zinckengineering.com
INDICATORS
The CHC has four LED indicators. They provide the following information:
 Red LED This is the power indicator and it will light up when power is applied to the CHC
 Orange LED Flashes to indicate the radio unit is working
 Green LEDs Indicates when a CHC relay has been energized and closed it’s contacts
TROUBLESHOOTING
If you are experiencing problems with CHC, please check the following:
Issue
Possible Solution
There are no LED indicators lit on the unit
Replace the power adapter with a working unit
Power is on, but the orange LED is not flashing
Replace the CHC
LED indicators are correct, but the Thermoztor
Dashboard shows the CHC is offline
Check the internet connection with a laptop to determine the
CHC can access the internet
IMPERISYS Dashboard shows the CHC is online,
but the storage devices are offline
 Relocate the CHC to reduce the range between the CHC
and the storage devices
 Install one or more IMPERISYS repeaters between the
CHC and the storage devices