Owner's Manual

OPERATING RANGE
PERSONAL PROTECTION EQUIPMENT
Please notice the scooter can travel a distance of 8.1miles/13km on a fully charged battery in ideal conditions. The following are some of the major factors that will affect the
operating range of your scooter.
Terrain: A smooth, flat surface will increase your driving distance, while driving uphill, as well as rough or uneven terrain will reduce your distance significantly.
Weight: The weight of the user can affect driving distance, a lighter user will have further range than a heavier user.
Ambient temperature: Please ride and store the scooter under recommended temperatures, which will increase driving distance, battery life, and overall performance of your
scooter.
Maintenance: Reasonable battery charging and maintenance will increase the distance. Overcharging the battery can reduce range.
Speed and Driving Style: Maintaining a moderate speed will increase your distance; while travelling at high speeds for extended periods, frequent starts, stops, idling, along with
frequent acceleration and deceleration will reduce your overall distance.
• Warning: There is a risk of falling whilst riding a scooter, so protect yourself at all times.
• Always wear a reliable safety helmet, elbow pads, knee pads and sports shoes.
• Never ride the scooter in bare feet, or sandals.
• Make sure shoelaces are tied reliably and out of the way of the wheels and
driving systems.
LIGHT
ADJUSTING HANDLEBARS
7
The light will automatically light up
when the scooter is in motion.
Requires 1 x 3V CR1632 battery (included).
Remove the thin plastic strip
from under the light unit,
to activate the battery.
To change the battery.
Using a thin screwdriver under the
footbrake, carefully prise out the
red light unit from its black surround.
THE REAR LIGHT
TO CHANGE THE REAR LIGHT BATTERY:
Gently pull out the
CR1632 battery
with tweezers and
insert a new one
(Positive side up).
Discard old batteries
at an official battery
collection site.
Push the red light unit back
onto the footbrake.
CR1632
4. Using the power key, turn off the scooter when you have finished using it.
Note: The scooter will turn o automatically if it has not been used for 10 minutes.
You can choose 3 lighting modes by pressing the button.
To replace the battery, remove the rubber sleeve and the back cover. Replace the battery with
the correct cell type (ensure the + sign is facing up) and replace the back cover and rubber sleeve.
Note: Requires 1 x 3V CR2032 battery (supplied).
1. Press the button to switch on, the LED will flash in short intervals.
2. Press the button a second time and the LED will flash in longer intervals.
3. Press the button a third time to activate a constant light.
4. Pressing the button a fourth time will turn the LED off.
1. Open the lock buckle of extension pole. 2. Press down height-limit button (the metal bead in hole of extension pole), and
pull extension pole to the length(3 levels of height for option) to fit rider's
height. When the metal bead goes into the hole, the height is fixed.
lock buckle
height-limit button
3. Close the lock buckle.
The extensive height is prohibited to exceed the first upper limit hole. The metal bead must be perfectly placed into the limit hole when the extensive height
is finalized. Before riding, it's a must to fasten lock buckle first. Any operation violating above instructions causes falling down by the loose front pole.
Need Help? Visit our website for replacement parts and product support WWW.ZINCSPORTS.COM
Contact us at [e-mail] OR CALL OUR CUSTOMER SERVICE LINE ON [phone]
1 2 3