bib hob SO THAT YOUR WARRANTY IS: VALID PLEASE REGISTER AT WWW SPORTSMANSHIP WITHIN 30 DAYS RECEIVING THE PRODUCT. ho BALANCE BIKE = 2. FRONT FORK 3. TUBE CLAMP 4. HANDLEBAR 1. BIKE FRAME 6.QUICK RELEASE — 8 SPANNER 9. RING BEARINGS X2 . 11. WASHER 12. CLAMP COVER STEP 1 STEP 2 STEP 3 STEP 4 STEPS Insert the front dark (2) Insert the second Insert the clamp Lock the tube clamp (3) Place the quick release through the ring bearing (3) ring bearing (9), nut {10}, cover (12) to the with the spanner (8).
I V7, STEP 6 STEP 7 STEP 8 Slide the seat post (5) into Hand tighten the screw on the Put the wheels (7) into the front Screw the dome nuts tight the frame. quick release bracket (6) and rear forks on each side of both wheels, and close the clamp using the spanner (8). Wipe with a damp cloth using mild detergent and water only fo remove dirt and dust. Dry thoroughly before use. Do not use industrial cleaners or solvents that may damage the surface.
Zinc Sports [M non-electric warranty Thank you for purchasing the Zinc Flute Dash Balance Bike and we hope that you enjoy using it. Please ensure that you read the following warranty. In order for your warranty to be valid you must satisfy the following conditions. = All products must be registered at www sportsmanship within 30 days of receiving the product for the warranty to be valid. = Proof of purchase is aso required for your warranty to be valid.
