Installation & Assembly

Step 1-To Assemble Bottom Drain Spigot
Remove the plastic cap and ONE rubber washer
Insert the spigot into the BOTTOM hole of the rain barrel.
Reattach the removed rubber washer inside the barrel before
attaching the plastic cap back.
(Make sure one rubber washer is outside of the rain barrel,
the other one is inside)
Adjust the spigot to a right direction.
Step 2-Assemble Top Overflow Valve
Remove plastic cap and ONE rubber washer
Follow step 1, insert the valve into the TOP hole of the rain
barrel.
(Make sure one rubber washer is outside of the rain barrel,
the other one is inside)
Package included:
1.Green Rain Barrel*1
2.Poles*6 (or 7 Poles for 100 Gallon Barrel)
3.Bottom Drain Spigot*1
4.Top Overflow Valve*1
5.(Extra White Spigot for 100 Gallon Barrel ONLY)
Step 3-(Assemble the Extra White Spigot
for 100 Gallon Barrel ONLY)
Follow Step 1 or Step 2 to insert the white spigot into the
MIDDLE hole of the rain barrel.
(Make sure one rubber washer is outside of the rain barrel,
the other one is inside)
Adjust the spigot to a right direction as shown on following
picture.
Step 4-Assemble the Rain Barrel Frame
Insert all the poles into the slot openings on the bottom of the
rain barrel.