Manualshelf

User manual

ManualsBrandsZiLOG ManualsConsumer electronicsZENETSC0100ZACG
12345678910
Ethernet Smart Cable
User Manual
UM020705-1012 Page 8 of 13
8. Enter an IP address of 192.168.1.21 and a subnet mask of 255.255.255.0. These
values place the PC on the same network as the Ethernet Smart Cable, and do not con-
flict with the IP address of the Ethernet Smart Cable.
9. Click
OK and restart the PC.
The PC is now ready to communicate with Ethernet Smart Cable via the ZDS II software.
The default IP address of the Ethernet Smart Cable unit is
192.168.1.50.
Changing the Default Settings of the Ethernet Smart Cable
The Ethernet Smart Cable is equipped with a web interface that allows you to change its
default settings. To access the Ethernet Smart Cable web interface, you must know the
Figure 5. The Internet Protocol Properties Dialog