User manual

PB016602-0605 Product Brief
Z8 Encore!
®
Flash Microcontrollers
Z8FMC16100 Series Product Brief
2
• 12-bit PWM module with three complemen-
tary pairs or six independent PWM outputs
with dead-band generation and fault trip input
• One 16-bit timer with capture/compare/PWM
capability
• One analog comparator for current limiting or
over current shutdown
• One Operational Amplifier and dedicated sam-
ple and hold function provides current level-
shifting and amplification for ADC current
sampling
• I
2
C in master, slave, and multimaster modes
• SPI controller
• UART with LIN interface
• Internal precision oscillator (IPO)
• Oscillator supports either internal IPO or exter-
nal crystals and ceramic resonators
• 17 General Purpose I/O pins (GPIO)
• Voltage Brown-Out/Power On Reset (VBO/
POR
• Watch-Dog Timer (WDT) with internal RC
oscillator
• Single-pin on-chip debugger
• In-circuit serial programming
• Operating at 2.7 to 3.6 Volts
• 32-pin QFN and LQFP packages
• Lead-free packaging option
• Standard and extended temperature ranges:
0º to 70º (S) and –40º to 105ºC (E)
eZ8 CPU Features
• New instructions for improved performance
including BIT, BSWAP, BTJ, CPC, LDC,
LDCI, LEA, MULT, and SRL
• Compatible with existing Z8
®
code
• Up to 10 MIPS operation
• C-Compiler friendly
• 2–9 clock cycles per instruction
.