User manual

Z8 Encore! XP
®
Development Kits
Quick Start Guide
Getting Started Using ZDS II QS004303-0205
Page 6
5. Browse to the Samples folder, located by default in:
c:\Program Files\ZiLOG\ZDSII_Z8Encore_<version>\Samples\
6. In the Samples folder, select the Z8Fxxxx_ledBlink folder, then the src folder, to
access the
ledBlink.zdsproj project file.
The sample used in the following steps is in the C programming language. An
assembler version of the ledBlink sample is located in the
Z8Fxxxx_ledBlink_asm folder.
7. Select the
ledblink.zdsproj file and click Open. The initial ZDS II program
screen opens (see Figure 2 on page 6).
The following figures are for reference only. You may have a newer ver-
sion of the software.
Figure 2. ZDS II Opening Screen
Note:
Note: