User manual

USB Smart Cable

User Manual

UM018112-0908 USB Smart Cable

4. Select Specify a location; then click Next.

5. Browse to one of the following driver directory:

\device drivers\USB\x32

<ZDS II Installation CD>\Device Drivers\USB\x32

6. Click OK, and then click Next after the appropriate driver is found.

7. Click Finish to complete the installation.

Windows 98 SE

1. Connect the USB Smart Cable to the host PC. The Found New Hard-

ware Wizard should activate automatically.

2. In the Found New Hardware Wizard, click Next.

3. Select Search for the best driver for your device (Recommended).

Click Next.

4. Select Specify a location. Browse one of the following to the driver

directory:

\device drivers\USB\x32

<ZDS II Installation CD>\Device Drivers\USB\x32

5. Click Next, and then click Next again after the appropriate driver is

found.

6. Click Finish to complete the installation.