Service manual

26 TTPM3 - Service Manual March 2009
4.4.3 Firmware
The firmware is the software that controls the TTPM3. It is stored in a Flash PROM and
can be updated from the host computer. How to do this is described in the Technical
Manual. You can download firmware from www.zebra.com
.
4.4.4 Cover
REMOVAL
1. Turn the printer upside down.
2. Remove the four screws securing the printer/encoder unit to the bottom pat of
the cover.
3. Lift the printer/encoder mechanism out of the Cover.
REPLACEMENT
Install the module in the reverse order.