User manual

! !!

ZIG&POEWP&100"USER"MANUAL!

Panel Description

Front Side

1. Source select – turns blue when HDMI is selected and off when VGA is

selected. Source selection can happen 4 ways:

a. Last source connected automatically is active and sent to display.

b. By pushing this button the source will toggle.

c. Via WebOS that will be covered later.

d. Via 3

party control.

2. HDMI Input – Connect HDMI cable here from your source (BlueRay,

Computer, etc.) up to 4K UHD.

3. VGA Input – Connect VGA cable here from PC/MAC or use a breakout

cable to connect Component, Y/C, or composite video sources.

4. CMD Button – this button can be used for almost anything you want – it is

programmed via the WebOS and is accessible via 3

party control or

WebOS. Use it to set lighting, trigger screen mask or drop screen. If using

with RXAV use one of its relays.

5. Audio Input – 3.5MM stereo audio input jack. The audio going into this

jack follows the VGA/Multi-port

Note: Auto-Switching function – if you remove an active source – and

another source is connected then it will switch to the new source

immediately. Additionally, as soon as you connect either source, if none

are connected, that port will become active immediately.