User manual

! !!
!
4"
ZIG&POEWP&100"USER"MANUAL!
!
Introduction
The ZIG-POEWP-100 is a wall plate 100 meter (328 feet) HDBaseT transmitter.
It can be powered with a 5 VDC supply or from a POE RX device that it is
connected to like a ZIG-PS-61 or ZIG-POE-RXAV. It can be used stand-alone as
an HDBaseT wall-plate transmitter, but really shines when paired with the ZIG-
POE-RXAV receiver/scaler & audio amplifier. A perfect “no-control” control
system using “on-connection” technology to fire up projectors, drop screens and
control lighting in small rooms – BYOD and in seconds collaborate with your
colleagues with full audio and video in stunning 4K UHD. A must for conference
rooms and huddle spaces.
Package Contents
• 1 x ZIG-POEWP-100
• 1 x User Manual
Features
• HDMI and VGA w/Audio input – VGA can be configured as Component,
Y/C or C.
• Auto-Switching function – if you remove an active source – and another
source is connected then it will switch to the new source immediately.
• IEEE POE – remote or source – can connect to IEEE POE device for
power or can connect directly to a 5VDC source via 2-pin phoenix style
connector on the back.
• WebOS setup and control – or control from ZIG-POE-RXAV hand-held
remote – simple automation or integrate into 3
rd
party controller.
• Supports HDMI 1.2, 1.3 and 1.4 with 48-bit deep color
• Supports digital video formats up to Ultra HD 4K/2K, 60Hz, 4:2:0 pixel
format
• Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby
TrueHD, DTS HD-Master Audio and more.
• Supports IR, RS-232 commands
• Supports HDCP 1.4 & 2.2
!