User manual

! !!
!
10"
ZIG&POEWP&100"USER"MANUAL!
!
Rear Side
1. HDBaseT output/LAN Port (fallback) connection – Connect RJ45 up to
100 meters (328 feet) CAT5e, 6, 6a. This is the connection to an
HDBaseT receiver such as the ZIG-POE-RXAV or ZIG-PS-61. You can
also use this connection when accessing via WebOS.
2. 5 VDC Power connection – if NOT using POE power you can connect a
5VDC supply via phoenix style connectors.
Captive Screw Connector – pin outs are also located on the
unit.
2-pin connector – for power
• Power – connect black wire to negative terminal (-)
• Power – connect white wire to positive terminal (+)