User's Manual

3.2 Setting the IP Address

Each station or device on your network must have a unique IP address. Following

these steps to setting the IP address:

Step 1 Connect an Ethernet station and the Access Point on the same subnet. The

simplest way to accomplish is to connect the Access Point and the Ethernet

station to the same hub. You need to check if the station IP address and the

Sub-net mask are configured properly. Also the new IP address for the Access

Point must correspond to the Subnet mask.

Step 2 In my computer window, double click the CD Drive icon. Choose WLAN

Access Point folder then double click to execute

IPConfig.exe

. Then

IPConfig

screen displays as shown.