User Manual

chapter 4:BIOS Setting
Award BIOS Setup
Standard CMOS Feature Set time & date, hard disk drive type, type of
floppy drive, Monitor type.
Advanced CMOS Feature Select system boot sequence, floppy control,
CPU cache settings, Shadow RAM.
Advanced Chipset Feature Configure chipset specific options and features
Integrated Peripherals Configure onboard I/O device addresses and
operating modes.
Power Management Setup Select various power saving options.
PnP/PCI Configurations Set PCI Plug and Play device options.
PC health Status Report system / CPU temperature and cooling
fans status.
Frequency/Voltage Control Select CPU' s Front Side Bus (FSB) frequency
and core/bus frequency ratio.
Load Fail-Safe Defaults Load settings that are more likely to configure a
workable computer when something is wrong. If
you cannot boot the computer successfully,
select the Fail-Safe option and try to diagnose
the problem after the computer boots. These
settings do not provide optional performance.
Load Optional Defaults Load settings that provide best performance
characteristic. (Default factory settings)
Setup Supervisor Password Change / Add / Remove supervisor password.
Setup User Password Change / Add / Remove user password.
page 32
Mainboard Manual