User Manual

chapter 4:BIOS Setting
Memory Frequency For
Set frequency of DIMM memory.Default is "AUTO".
CPU Latency Timer
Enables CPU BIST. Default is "Disabled".
Buffer Strength Control
This option allows the experience user to fine tune the DRAM control setting.
Leave this setting as default will have more safe & stability performance.
DRAM Read Thermal Mgmt
Select "Enable" to allow Dram Read Thermal Mgmt to manage DRAM speed
according to it's temperature.Once the DRAM temperature increase to a specific
level,Thermal Mgmt will slow down DRAM speed for a certain period of time(can
be specific in "Delay Prior to Thermal")in order to cool down the DRAM
temperature to determine whether to change DRAM speed back to its normal
operation speed or not. Default is"Disabled".
System BIOS Cacheable
Enabled/Disabled System BIOS catch.Default setting is "Disabled".
Video Bios cacheable
Enabled/Disabled Video BIOS catch.Default setting is "Enabled".
Video RAM cacheable
Enabled/Disabled S-Video RAM catch.Default setting is "Disabled".
Memory Hole At 15M-16M
Enabled/Disabled Memory Hole at 15M-16M.Default is "Disabled".
Delayed Transaction
Enabled/Disabled ICH(I/O Controller Hub) delayed transactions for internal
register,firmware Hub(FWH) and Low Pin Count(LPC)interface access.default is
"Disabled".
AGP Aperture Size
Set maximam memory aperture for onboard AGP port.Available settings are
4MB,8MB,16MB,64MB,128MB and 256MB.Default is "128MB".
Delay Prior to Thermal
You must have "Dram Read Thermal Mgmt" option enabled in order for this
option tobe meaningful.This option sets the time between each DRAM Thermal
detection once the Thermal activities.Options are 4min/8min/16min/32min.
Default is "16min".
System BIOS Protect
Enabled to protect system BIOS from overwritten.
page 37
Mainboard Manual
BIOS Setting