User Manual

chapter 4:BIOS Setting
4.3 Advanced BIOS Features

-3 BIOS 
Virus Warning
Enabled / Disabled Virus Warning function. Default setting is "Disabled".
CPU L1&L2 Cache
Enables processor on-chip L1 and L2 cache memory. Default is "Enabled".
Quick Power on Self Test
When Enabled, BIOS will skip certain power-on self-test (POST) procedures
(such as memory test above 1MB) to speed up the boot process. Default
setting is "Disabled".
First / Second / Third Boot Device
Assign the priority of each storage device to be the boot-up drive. Supported
devices are HDD, Floppy, LS-120, ATAPI ZIP, CDROM, SCSI, NETWORK.
Default boot sequence is Floppy -> HDD-0 -> CDROM.
Boot Other Devices
Specifies whether BIOS to boot from other device not listed in the 1st/2nd/3rd
Boot Device options when BIOS fail to boot from those devices. Default setting
is "YES".
Swap Floppy Drive
Set this option to "Enabled" to permit drives A: and B: to be swapped. Default is
"Disabled".
page 34
Mainboard Manual