User Manual

chapter 4:BIOS Setting
4.12 Set Supervisor / User password

-12 Set Supervisor 
When you select this function, the following message will appear at the center
of the screen to assist you in creating a password.
Type the password, up to eight characters and press<Enter>. The new
password will clear the previously entered password from CMOS Memory, you
will be asked to confirm the Password. Type the password again and press <
Enter>.
To disable password,just press <Enter> when you are prompted to enter
password.A Message <<PASSWORD DISABLED!!!>>will appear to confirm the
password being disabled.Once the password is disabled.the system will boot
and you can enter setup freely.
If you select "System" at "Security Option" in "Advanced BIOS Features" Menu,
you will be prompted for the password every time.if you select "Setup" at "
Security option" in"Advanced BIOS Feature" Menu,you will be prompted only
when you try to enter Setup .
Mainboard Manual
page 46