User Manual

chapter 4:BIOS Setting
Use IR pins
Setting IR mode.Default is IR_Rx2Tx2.
Onboard Parallel Port
Specifies the I/O port address of the onboard parallel port. Available settings
are Auto, Disable, 378h, 278h and 3BCh. Default is "Auto".
Parallel Port Mode
Specifies the onboard parallel port mode. Available options are Normal, Bi-Dir,
ECP and EPP. Default is "ECP".
EPP Mode Select
Specifies the Enhanced Parallel Port specification version number. This option
only appears if the Parallel Port Mode is set to "EPP". The settings are 1.7 or 1.
9. Default is N/A because the default setting for the Parallel Port Mode option is
not EPP.
ECP Mode USE DMA
This option only appears if the Parallel Port Mode option is set to ECP. It
assigns a DMA channel to the onboard parallel port. Available settings are 1, 3.
Default is "3".
Game Port Address
Specifies the Onboard Game Port I/O address. Available settings are 201, 209,
and Disabled. Default is "201".
Midi Port Address
Specifies the I/O address of the MIDI interface on the Onboard Game Port.
Available options are 300, 330 ,290 and Disabled. Default is "330".
Midi Port IRQ
Assigns the IRQ line to the MIDI interface. Available options are 5 and 10.
Default setting is "10". This option is not available if the Onboard Midi Port is
disabled S-232 serial port.
page 40
Mainboard Manual