User Manual

chapter 5:Hardware Installation
Please follow these steps in order to assure that your series of mainboard
installation is successful. Please refer to the back chapters for further
information regarding boot-up and configurations. An anti-static wrist band is
recommended when handling electronic components, be sure your work area is
static free before you begin this section.
1.Reference User Manual,Check the setting of mainboard accord with describe.
2.Installing the Central Processing Unit
The mainboard provides a 478 pins, CPU Socket. Simply disengage the lever
from the locking latch,lift it to its vertical position.Match the triangle markings on
both the CPU and the Socket478,Carefully drop the CPU into the socket such
that all the CPU pins entered the holes in the socket.Apply slight pressure if
necessary.Make sure the CPU is level with the surface of the socket.Maintain a
slight pressure on the CPU and rotate the lever back to its horizontal(or locking)
position,and snap the lever back to the locking latch.
Mainboard Manual
page 48