User's Manual

Mainboard User's Manual Page 23
BIOS Setup
Boot Up Floppy Seek
Specify whether floppy drive A: will perform a Seek operation at system boot. Default
setting is "Enabled".
Boot Up NumLock Status
Sets this option "OFF" to turn the Num Lock key off when the computer is booted
such that you can use the arrow keys on both the numeric keypad and the keyboard.
Set this option to "ON" to enable the numeric pad when the system is turned on.
Default is "ON".
Gate A20 Option
Sets "Fast" to allow chipset to control Gate A20; Sets "Normal", to let a pin in the
keyboard controller to control Gate A20. Default setting is "Fast".
Typematic Rate Setting
Enabled / Disabled Typematic Rate setting, when enabled, the typematic rate and
typematic delay can be selected. Default setting is "Disabled".
Security Option
Enables password checking every time the computer is powered on or every time
BIOS Setup is executed. If System is chosen, a user password prompt appears every
time the computer is turned on. If "Setup" is chosen, the password prompt appears if
BIOS Setup is executed. Default setting is "Setup".
APIC Mode
Enable / Disable APIC (Advanced Programmable Interrupt Controller) functions.
Default setting is "Enabled".
MPS Version Control For OS
Options are 1.1 and 1.4
OS Select For DRAM > 64MB
Sets to "OS2" if running OS/2 operating system and using more than 64MB system
memory. Default setting is "Non-OS2".
Report No FPP for WIN 95
Selects "Yes" when the system is running Windows 95 and no floppy driver is installed.
Otherwise, leave it as default "No".
Small Logo (EPA) Show
Enable / Disable EPA logo to be shown during boot up.