User's Manual

Advanced BIOS Features
Virus Warning
Enabled / Disabled Virus Warning function. Default setting is "Disabled".
CPU L1 & L2 Cache
Enabled / Disabled CPU internal L1 & L2 cache. Default setting is "Enabled".
Quick Power On Self Test
When Enabled, BIOS will skip certain power-on self-test (POST) procedures
(such as memory test above 1MB) to speed up the boot process. Default
setting is "Enabled".
First / Second / Third Boot Device
Assign the priority of each storage device to be the boot-up drive. Supported
devices are IDE, Floppy, LS-120, ZIP100, CDROM, SCSI, LAN or Disabled.
Default boot sequence is Floppy -> IDE-0 -> LS-120.
Boot Other Device
Specifies whether BIOS to boot from other device not listed in the 1st/2nd/3rd
Boot Device options when BIOS fail to boot from those devices. Default setting
is "Enabled".
Swap Floppy Drive
Sets this option to "Enabled" to permit drives A: and B: to be swapped. Default
setting is "Disabled.
Mainboard User's ManualPage 22