User's Manual

Mainboard User's ManualPage 14
ATX Power Supply Connector (20-pin ATXPWR)
The single 20-pin connector (B in mainboard diagram)
incorporates standard +/-5V and +/-12V, with a standby 5V.
With a power supply that supports remote power on/off,
the mainboard can turn off the system power through the
software control, such as the shutdown in Windows 95 Start
Menu. The BIOS system will turn the system power off when
it receives the proper APM command from the OS. APM
must be enabled in the BIOS and OS systems in order for
the soft-off feature to work properly.
Attaching the power supply wire
IMPORTANT: Wire should always be connected with the red
stripe on the Pin 1 side of the connector. The four corners of
the connector's are labeled on the mainboard.
ATX Power Connector
Attaching ATX Power Supply.