Technical data

Operating panel

The test operation switch is used as an emergency operation switch.

1. EMERGENCY OPERATION (MANUAL) SWITCH. If the wireless remote controlling system is not available

(when the wireless remote controller is lost or is out of battery), the air conditioning system is able to

continue its operation temporarily.

TEST OPERATION (MANUAL)SWITCH. Test operation is needed in special occasion when you need to test

the “cooling operation” even with the room temperature below 16°C, therefore it is not for the nor-

mal operation at all.

2. POWER/ELECT (POWER INDICATOR). The power indicator lights when the operational ON/OFF of the

remote controller is “ON”.

3. TIMER (TIMER MODE INDICATOR). The timer mode indicator lights when timer switch of the remote

controller is in “ON” or “OFF” position.

4. OPERATE (OPERATING MODE INDICATOR). The operating mode indicator lights when the air conditio-

ner is being operated.

Auto recovery function

lf there is any power failure during operation, operation status before power failure is memorized. 3~4

minutes after power recovery, the unit restarts automatically with previous operation status memorized

(3~4 minutes is protective time for compressor).

/ POWER

Operating panel