Technical data

T
he filter frame on the backside of the unit can be opened. The Mold-Proof screen filter, the Photo-cataly-
tic Anti-odor Filter and the Static Catechin Filter can be installed or removed.
a. The Mold-Proof screen filter has to be cleaned regularly with a vacuum cleaner to avoid blocking of the
air flow. Alternatively take out the filter and wash it with water. After washing, dry the filter com-
p
letely in the shade.
b. The Photocatalytic Anti-odor Filter can be recharged by placing it into direct sunlight for 6 hours per
half year. The presence of smoke, etc can shorten the lifetime. Expected lifetime under normal circum-
stances 2~3 years
c. The Static Catechin Filter; can be cleaned with a vacuum cleaner when dusty but has to be changed at
the expected lifetime under normal circumstances after approximately 1 year.
F MAINTENANCE
Remote controller
Do not use water, wipe the controller with a dry cloth. Do not use glass cleaner or chemical cloth.
Indoor body
Wipe the air conditioner by using a soft and dry cloth. For serious stains, use a neutral detergent diluted
with water. Wring the water out of the cloth before wiping, then wipe off the detergent completely.
Do not use the following for cleaning.
Gasoline, benzine, thinner or cleanser may damage the coating of the unit. Hot water over 40°C (104°F) may
cause discoloring or defor
mation.
G
WARNING!
Befor
e maintenance, be sur
e to tur
n of
f the system and the cir
cuit breaker.
G
NOTE
The Photocatalytic Anti-odor Filter and the Static Catechin filter are delivered in a separate plastic
packaging. Remove plastic bags and install filters (refer chapter B).
G
NOTE
•
The old filters can be disposed in the ‘Non-biological garbage container’.
• Replacement filter packages are available at your dealer.
• To run the unit without Mold-Proof filter, Photocatalytic Anti-odor Filter or Static Catechin
filter does not bring any har
m to the airconditioner. In that case odours and airborne micro
organisms are not removed from the circulated air.
4
76