Technical data

Emergency and test operation

Emergency Operation

• The emergency operation is needed only when the remote control can not be used.

• When you press the Emergency Operation Switch, you will hear a beep and the emergency operation

tarts.

• Emergency operation is preset for the following two modes, only based on the temperature of the

room at the time of operation.

Test operation

• Same switch as used in Emergency operation.

• Test operation is needed in special occasion when you need to test the “cooling operation” even with

the room temperature below 16°C, therefore it is not for the normal operation at all.

• Press the Emergency operation switch and hear the beep once, then keep on pressing the switch for

more than 5 seconds but no more than 10 seconds. After the first 5 seconds you will hear two beeps

then release the switch and you will have the Test Operation Mode.

• The Test Operation Mode will run the air conditioner at “cooling” with air flow speed at “Hi” for 30

minutes and stops automatically.

Termination of emergency or test operation

• You can terminate the operation when you hear a beep by either pressing the switch once more, or by

operating through remote control.

• When you operate through remote control, is automatically get back to just normal operation mode by

remote control.

E AIR FILTER

This air conditioner is equipped with 3 filter types to clean the circulated room air.

Mold-Proof screen filter; the screen filter removes dust particles from the air. The surface of the screen

filter is mold proof which prevents mold from growing, and thus delivers clean, fresh air from the air-

conditioner.

Photocatalytic Anti-odor Filter; to remove odours.

c. Static Catechin Filter; Inhibiting proliferation of viruses and germs.

NOTE

Emergency operation at the temperature between above 23°C and below 26°C just switch the

machine in operation in “cooling mode” without actually “cooling”. It is not possible to operate

in “Dry” mode.

Temperature

peration

mode

esignated

temperature

Timer mode Air flow

Above 23°C Cooling 26°C Continuous Automatic

Below 23

Heating 23

Continuous Automatic