Technical data

Air flow adjustment
Vertical adjustment
The vertical louver will move automatically to the suitable position when ON/OFF
button is pressed.
Swing of air flow
The vertical louver will keep moving within the range illustrated on the right, if
the vertical louver button is pressed once.
Fixing the air flow Direction
The vertical louver will come to a halt if the vertical louver button is pressed once
again. The vertical louver will be set at previous position automatically for the next
operation.
Swing of Air Flow
The horizontal airflow can be adjusted by manually changing the horizontal louver blades.
Timer operation
Before setting the timer, confirm that the present time is set accurately. Once you set the timer, the remote
controller memorizes the setting. From the next time, you can operate the same timer mode just by pres-
sing the ON/OFF button and the T
imer fixing (“ON/OFF Timer”) button.
You can use the combined function of the “ON Timer” and “OFF Timer”.
“ON Timer”
Example: set the “ON T
imer” to 7 a.m.
Operation starts at the set time.
G
NOTE!
• Dew drops may appear at the outlet under high humidity (e.g.during rainy season) if the
system is operated with the horizontal louver faced to the extreme right or left.
•
Use the wireless remote control unit to change the angle of the horizontal louver. The
horizontal louver may move out of the normal range if forced by hands. Unplug in order to
initialize the setting if you encounter problems.
G
NOTE!
•
The vertical louver closes the outlet automatically when the unit is switched off.
• Do not keep the vertical louver downward for a long time during cooling or dry operation.
Otherwise dew drops may appear at the outlet.
• The angle of vertical and horizontal louvers may automatically change to prevent
condensation during cooling operation.
• Use the wireless remote control unit to change the angle of the vertical louver. Do not force to
move it by hands as it may make the louver not work correctly. Stop the operation once and
turn on again if the louver doesn’t work correctly.
4
72
Standard Position
Level
Approx. 10 degrees
(Cooling/Dry)
Approx. 70 degrees
(Heating)
Swing of Air Flow
Level
Approx. 10
degrees
Approx. 40
degrees
A
pprox. 45
d
egrees
Approx. 70
degrees
Cooling
Dry
Heating