Technical data

D I

NSTRUCTIONS FOR USE

Present time setting

Example: Set to 3:50 p.m.

1. Press the “TIME ADJ” button once

. Adjust the time with “+”, “-“ buttons. Holding a button changes time set-

ing in 10-minute intervals.

3. Press the “TIME ADJ” button 3 times. The present time appears on the dis-

play. The setting is complete.

Circulation operation

When you use other heating equipment, heated air accumulates in the upper

space of the room. Using the operation “Circulation” will equalize the differences

between the upper and lower spaces of the room and improves the efficiency of

your heating equipment..

1. Press the ON/OFF button

2. Set the operation mode, circulating , by pressing the operation mode but-

ton.

3. Adjust the setting temperature by pressing the temperature setting buttons.

Circulating Operation begins after the room temperature reaches the tem-

perature set by the remote controller.

4. Adjust the fan speed by pressing the fan speed button. When the MODE is

set at “AUTO”, the fan speed changes automatically.

WARNING!

• Do not place heating equipment right under the indoor unit and the remote controller.

• Adjust air flow direction to avoid the direct airflow hitting to the heating equipment.

• Provide adequate ventilation

NOTE

Even if the actual time is not programmed, you can use all operations

except “Timer operation”