Technical data

Remote Control
G
NOTE
• 00:00 A.M. – 12:00 A.M. = 00:00 – 12:00
• 00:00 P.M. – 12:00 P.M. = 12:00 – 24:00
G
ATTENTION!
•
Because of Auto Recovery Function, if shutting off the power supply during operation, the unit
m
ay restart irrespective your intention when turning on the power supply again.
• If the unit is not to be used for a long time, shut off the power supply after terminating all
operation with remote controller.
4
24
Sends signals to the receiver of the indoor
unit.
Indicates the fan speed selected by the fan
speed button. When set at “AUTO”, the fan
speed changes automatically according to
t
he difference between the designated
temperature and the room temperature.
I
ndicates the current operating mode
Indicates the present time or the timer.
ON:The air conditioner starts operation at
the designated time.
OFF:The air conditioner stops operation at
the designated time.
Indicates the temperature set by the tem-
perature setting buttons.
Lights up when a signal is sent.
The setting temperature increases
by 1°C (1.8°F) per press.
The setting temperature decreases
by 1
°C (1.8°F) per press.
Holding a button changes the temperature
setting quickly.
Air flow direction can be changed horizon
-
tally (upw
ard and downward) by each press.
1
TRANSMITTER
2
FAN SPEED
3
OPERATION MODE
4
TIME DISPLAY
5
TIMER MODE
6
TEMPERATURE
7
TRANSMITTING
8
TEMPERATURE
9
LOUVER BUTTON
G
enerates negative ions. For the inverter
models only, the power indicator lights up
red.
Use to adjust the fan speed. The indication
of the fa speed varies among “L” (Low),
“
M” (Medium), “H” (High), and “AUTO”
each time the button is pressed.
U
se to change the operating mode. The
indication of the operating mode varies
a
mong (Automatic), (Cooling),
(Dry), (Circulating) and
(Heating) each time the button is
pressed.*
Press the “TIME ADJ” button to adjust the
present time or the timer.
Press these buttons to adjust the present
time or the timer.
Forward time
Backward time
Holding a button changes the time setting
in 10-minute intervals.
Press these buttons to turn the timer ON or
OFF
.
Press this button for the Sleep setting.
Starts operation with a press:
stops opera-
tion with the next press.
j
IONIZER BUTTON
k
FAN SPEED BUTTON
l
OPERATION MODE
BUTTON
m
TIME ADJ BUTTON
n
, BUTTONS
o
TIMER FIXING
p
SLEEP BUTTON
q
ON/OFF BUTTON