Technical data

Operating panel
The test operation switch is used as an emergency operation switch.
1. EMERGENCY OPERATION (MANUAL) SWITCH. If the wireless remote controlling system is not available
(when the wireless remote controller is lost or is out of battery), the air conditioning system is able to
continue its operation temporarily.
TEST OPERATION (MANUAL) SWITCH. Test operation is needed in special occasion when you need to
test the “cooling operation” even with the room temperature below 16°C, therefore it is not for the
normal operation at all.
2. POWER/ELECT (POWER INDICATOR). The power indicator lights when the operational ON/OFF of the
remote controller is “ON”.
3. TIMER (TIMER MODE INDICATOR). The timer mode indicator lights when timer switch of the remote
contr
oller is in “ON” or “OFF” position.
4. OPERATE (OPERATING MODE INDICATOR). The operating mode indicator lights when the air conditio-
ner is being operated.
Auto recovery function
lf there is any power failure during operation, operation status before power failure is memorized. 3~4
minutes after power recovery, the unit restarts automatically with previous operation status memorized
(3~4 minutes is pr
otective time for compr
essor).
/ POWER
Mold-proof Air Filters
Air Inlet grill
V
ertical
l
ouver***
A
ir outlet
*
** The air flow direction can be
a
djusted with the vertical and
horizontal louvers.
-
Beeping sound assures successfull
s
ignal transmission between wire-
l
ess remote and the indoor unit.
* two on each side
H
orizontal
l
ouver***
R
emote
S
ignal
Receiver
4
6
Operating panel
man_S15xx.qxd 07-02-2007 16:54 Pagina 6