Technical data

Programming the “ON Time”
1. Press the “TIME ADJ” 2 times.
2. Adjust the time with the button. The time setting changes in 10-minu-
te intervals. Hold the button to fast forward the time.
3. Press the “TIME ADJ” button two times. The setting of “ON Time” is com-
plete and the present time appears.
4. Press the “ON/OFF” button. Proceed from Step 5 (below) if the unit has been
operated or the OFF Timer has been set.
5. Press the timer fixing button “ON”. The “ON Time” is displayed for 2 seconds
and then the present time appears.
Cancelling “ON Timer”
Press the Timer fixing button “ON”. The timer lamp of the indoor unit goes off.
“OFF Timer”
Example: Set the “Off Timer” to 10 p.m.
Operation starts at the set time.
Programming the “OFF Time”
1. Press the “TIME ADJ” 3 times.
2.
Adjust the time with the button. The time setting changes in 10-minu-
te intervals. Hold the button to fast forward the time.
3. Press the “TIME ADJ” button once. The setting of “OFF Time” is complete and
the present time appears.
4
14
man_S15xx.qxd 07-02-2007 16:55 Pagina 14