Specifications

4
63
switch on or off.
Switching off
The timer OFF function can be set when the airconditioner is switched on:
• Press button
• Set the number of hours desired (1-12) with the aid of  and 
• Press to save
Switching on
Default temperature setting is 24°C.
The timer ON function can be set when the airconditioner is switched off
(stand-by):
• Select the desired mode and temperature
• Press button
• Set the number of hours desired (1-12) with the aid of  and 
• Press to save
You can delete the set timer function by pressing the button on the
remote control.
When the set time is at “00”, the timer is switched off. When the Timer
function has been set the blue light in the button on the front of the device
will switch on.
ADJUSTING THE CLOCK
• Press Timer/Clock button for 3 seconds. Change the time by pressing the 
and  -button. When the desired time has been set, press the Timer/Clock
button for 3 seconds again in order to save the setting. In every holding
second LCD clock display changes setting by 1 minute interval.
• Press  or  and holding more than 1 second, the LCD clock display changes
setting by 30 minutes interval.
LAMPS ON/OFF SWITCH
Switch to on/off lights on control panel on front of unit. When lights are switched
to Off, the alarm function of the lights is still maintained.
D AIR FILTER
This airconditioner is fitted with a 3-layer filter to purify the circulating air. The
airconditioners are supplied with a separately packed Bacterio-static 3M
TM
HAF
filter and activated carbon filter. These filters must be placed in accordance with
the instructions before the airconditioner is used.
G
ATTENTION
Avoid the remote control from getting wet. Remove it from the unit
when condensation can occur.
G
TIP!
The light of the display fades when the remote control has not been
used for some time. This is reactivated when you touch any button.
5
man_Px2xx_1.qxd:man_P122-125.qxd5 22-12-10 15:56 Page 63