Technical data

4
125
H HOW THE AIR CONDITIONER WORKS
A
UTOMATIC OPERATION
• When you set the air conditioner in AUTO mode (button  on the remote
controller), it will automatically select COOLING, HEATING or FAN only ope-
ration depending on what temperature you have selected and the room
temperature.
• The air conditioner will control room temperature automatically round the
temperature point set by you.
•
If the AUTO mode is uncomfortable, you can select desired conditions manu-
ally.
SLEEP/ECONOMIC OPERATION
• When you push SLEEP button  during COOLING, HEATING or AUTO opera-
tion, the air conditioner will automatically increase (cooling) or decrease
(heating) 1ºC per hour. The set temperature will be steady 2 hours later and
remains steady for 5 hours. After 5 hours the unit will stop. The fan speed
will be automatically controlled.
DEHUMIDIFYING OPERATION
• The dehumidifying mode will automatically select the dehumidifying operation based on the differen-
ce between the set temperature and the actual room temperature.
• The temperature is regulated while dehumidifying by repeatingly turning on and off of the cooling
operation or fan only. The fan speed is controlled automatically.
• In normal cooling operation the air conditioner will also dehumidify the air.
G
NOTE
When the air conditioner is dehumidifying it is likely that the room temperature will decrease. It
is therefore normal that a hygrostat will measure a higher relative humidity. The absolute
humidity in the room will however be lowered, depending on the amount of moisture produced
in the room (cooking, people etc).
1
1
1
1
P
ress Sleep button
Press Sleep button
COOLING
H
EATING
DEHUMIDIFYING
Set
Tempe-
rature
1 hour 1 hour
1 hour 1 hour
Set
Tempe-
rature
Set temperature
Time
Room
tempe-
rature
Cooling Fan only Cooling Fan only Cooling
fig. 9
man_S13xx_SC13xx.qxd:man_S18xx 24-11-10 12:33 Page 125