Specifications

4
93
C OPERATION / REMOTE CONTROL
Symbols:
Automatic
Cooling
Dehumidifying
Cir
culating air
Heating (only by PH 733)
High ventilator speed
A
verage ventilator speed
Low ventilator speed
G
ATTENTION!
Without the remote control, the air-conditioner can be operated by
using the button on the fr
ont of the device. In this event however
, only
the automatic function can be used.
Ventilator speed indicator
Function indicator
Signal indicator
Clock
Negative ion function indicator
Timer setting indicator
Timer on/off
Celsius / Fahrenheit control light
Temperature setting indicator
On/off
Fan speed
Function
selector switch
D
own
LCD display
Clock
Timer
Temperature display selector
button (Celsius / Fahrenheit)
Up
G
ATTENTION!
• Avoid the remote control from getting wet. Remove it from the unit
when condensation can occur.
G
COMMENT!
The flexible air exhaust hose(s) can be stretched to a length of
approximately 1200 mm. The length of these hose(s) was calculated on
the basis of the capacity of the device. The use of other hoses or
extensions may cause faults in the device. The exhaust air must be able
to flow out unhindered. If this is not possible this may lead to
overheating or water condensation in the air exhaust hose
J.
This is why you must ensure that there are no kinks or sharp corners in
the air hose(s). To obtain an optimum result, the air hoses must be kept
shorter than 1 metre while the airconditioner is in use.
man_uk_P7xx.qxd 08-11-2006 15:21 Pagina 93