Specifications

new filter recommended change of filter

If it has become dusty, the activated carbon filter can be cleaned with a

vacuum cleaner, but it must be replaced simultaneously with the Bacterio-

static 3M

HAF filter.

Excessive dust, building work, pets, the presence of smoke and frequent use of

the device affect the lifespan of the Bacterio-static 3M

HAF filter. A signal is

given after approximately 650 hours of operation in order to prevent you from

forgetting to replace the filter: The Low Sound light on the front of the device is

blinking. Take the following action:

Switch the unit off, but leave the mains cable in the socket.

Replace the old filters with new, original filters that are available from your

dealer;

• Remove the filter holder E from the airconditioner

•

Open the filter holder E, take the filter clamp of

f the filter holder and

remove the old filters. Place the new activated carbon filter (black) and

HAF filter (white) in the filter holder E.

• Fit the filter clamp back onto the holder.

• Put the filter holder E back into the airconditioner

Press the LED lamps on/off switch on the front of the device

(approximately 4 seconds), until it beeps.

The indicator light is switched off.

The old filters are not chemical waste and may be thrown away in the normal

rubbish container (not biological waste).

NOTES!

• Never use the airconditioner without the mesh filter!

• Using the device without the activated carbon filter and/or 3M

HAF

filter will not damage the device. In this case, particles that may be

detrimental to health are not removed.

• Filter packages are available at your dealer.

• Only use suitable Zibro filters. This will prevent any damage to your

airconditioner. Using other than the original filters is entirely at the

risk of the consumer. This may have a negative effect on the

operation of the device and may result in damage. The device may

also leak water subsequent to the formation of ice.

man_Px2xx_1.qxd 19-05-2008 11:53 Pagina 64