Specifications

4
29
E MAINTENANCE
R
emove the plug from the socket before carrying out any maintenance or
cleaning work on the machine. For safety reasons it is forbidden to use water
while cleaning:
E Clean the outside with a slightly damp cloth followed by a dry cloth.
E Do not use alcohol or cleaning products when cleaning.
E C
lean the air filter every week. Remove the filter from the back of the
machine and clean it with a vacuum cleaner.
E Clean the front (grille) with a vacuum cleaner (fig. C).
F STORAGE
Take the following steps if you do not intend to use the machine for an extended
period of time:
E Allow the machine to cool down.
E Remove the plug from the socket and empty the reservoir.
E Clean and/or replace the air filter. Filters are available at your supplier.
E Store the machine in a dust-free environment, e.g. in a plastic bag.
G TIPS FOR SAFE OPERATION
E The machine was designed to dehumidify and to heat. You should not use it
for any other purpose.
E It is dangerous and forbidden to modify the machine.
E Always contact your supplier if repairs are required.
E It is forbidden for children to play with the machine. The machine may only
be used by adults.
E The machine must always be connected to the mains with an earthed connection.
E Avoid the use of extension cables or multiple plug boards.
E Always switch the machine off before carrying out maintenance or cleaning
work.
E Do not install the machine near heat sources or near flammable
installations/materials (e.g. curtains) or explosive environments.
E Whenever you disconnect the machine, you must always wait at least three
minutes before reconnecting it.
E When connecting and disconnecting the machine from the power supply, the
ventilator/selector switch must be set to the ‘0’ setting.
E It is forbidden to cover the machine or to insert foreign objects into the
machine in connection with the risk of overheating or fire.
E Ensure that the wires are concealed when placing the machine.
E The machine may not become wet.
E The machine must always be placed vertically, particularly during transport.
Always empty the water reservoir before transporting the machine.
This machine has a safety system that automatically switches the machine off in
case of overheating or if the airflow is hampered. If this occurs, disconnect the
machine and r
emove the object (from the back of the machine). Allow the
machine to cool down for approximately 15 minutes before reconnecting it.
CC
☞