User manual

B. Specifications
131
J7 (Auxiliary Power)
J7 is a location for a 2-pin latching COMBICON connector with 0.2 inch contact spacing.
J7 includes the power and ground connections needed to power the ZT 8904 when the
STD bus connection is not used. The pin assignments are given in the following table,
"J7 Auxiliary Power Pinout." The multiple-source board mount connectors and
associated mating connectors are shown below.
Board Connector Mating Connector
Augat 5EHDV-02 Augat 5ESDV-02
Phoenix Contact MSTBVA2.5/2-G Phoenix Contact MVSTBR2.5/2-ST
Riacon 31020102 Riacon 31049102
J7 Auxiliary Power Pinout
Pin # Signal Type Description
1 VCC In +5 Volts
2 GND In Ground