Specifications

Specifications
MECHANICAL
Card Dimensions & Weight
The ZT 8832 meets the STD 32 bus specification for all mechanical
parameters except for the component lead length protruding from the
back of the board. The specification requires a maximum lead length
of 0.093 inches, but the battery socket pins extend a maximum of
0.150 inches. Be sure the battery socket pins do not touch the adjacent
board when installing the ZT 8832 into the STD bus card cage. In a
card cage with 0.625 inch spacing, the ZT 8832 requires one card slot
without an SBX expansion module installed and two card slots with
an SBX expansion module installed.
Board Length ................................. 16.51 cm ±0.063 cm
(6.500 in ±0.025 in)
Board Width .................................. 11.43 cm ±0.038 cm
(4.500 in ±0.015 in)
Board Thickness .............................. 0.158 cm ±0.013 cm
(0.062 in ±0.005 in)
Board Weight ...................................... 155.9 g (5.5 oz)
Board Height From Top Surface
Without following items .......... 9.652 mm (0.380 in) max
Including Battery ............... 10.922 mm (0.430 in) max
Including SBX Expansion Module 29.21 mm (1.150 in) max
Board Height From Bottom Surface ........ 3.81 mm (0.150 in) max
B-6