Specifications

Jumper Configurations
Table A-4
ZT 8832 Cuttable Traces (continued).
TRACE # DESCRIPTION
CT10 STD Bus AUX Ground - connects the STD
bus AUX GND signal (P1 pins 53 and 54)
to the STD bus logic GND signal (P1 pins
3 and 4).
CT10 Operation
† In AUX GND connected to logic ground
Out AUX GND not connected to logic ground
CT14 STD Bus Dual Port RAM Addressing -
selects between the upper or lower
8 Mbytes for CPUs that have a 16 Mbyte
addressing range. See page A-10.
CT14 Address Range
† In Upper 8 Mbytes
Out Lower 8 Mbytes
†Factory default configuration.
A-20